Turbine Engine Assembly System Accessories

Custom Frame Heights Available (Low Profile Shown)

Scroll Chuck with 3-Point Contact

These 3-point contact scroll chucks are constructed with high-quality forged steel, allowing for higher lathe speeds. The hardened ground scroll is precision balanced, which allows for greater accuracy and longer life. Similarly, the hardened jaws and pinions increase the life of the entire chuck. The American standard tongue and groove master jaws allow for greater flexibility, making this a top choice tool.

Inspection Style Gage Stands (Model GSI-24P/12A Shown)

Specifications:
• 24” vertical square post with rack-and-pinion drive
• Available with 12”, 14”, 18” horizontal arm with friction drive
• 1/4” Ø swivel mount for LVDT electronic or dial indicators
• Drive assembly with 360° swivel and locks to hold post and arm positions

Base options:
• Portable heavy-duty cast-iron base with 3-point hardened steel pads
• Locking swivel mount for the side of granite surface plate*
• T-slot base plate with locking swivel mount*
*Requires threaded inserts in granite or T-slot plate (not included)

Custom sizes are available on request.

Tool Room Style Portable Gage Stands (Model GST-24P/12A Shown)

Specifications:
• 1.0” diameter x 24” tall vertical post
• 5/8” diameter x 12” horizontal arm
• 360° manual swivel assembly with locks to hold post and arm positions
• 1/4” Ø swivel mount for LVDT’s, electronic or dial indicators

Base options:
• Portable base with 3-point hardened steel pads
• Portable base with built-in fine adjust feature
• Locking swivel mount for the side of granite surface plate*
*Requires threaded inserts in granite (not included)

Custom sizes are available on request.

Adjustable Probe Mounts (Plunger and lever Shown)

On the left, see the clamps for the barrel of a plunger probe. And on the right, see the dovetail found on the lever probes.

Combo: Lever/Plunger-Type Gage Mount & Dual Plunger-Type Gage Mount

The combo lever/plunger type probe mount is designed to allow two probes to gain access to a face and diameter in close proximity to one another using one horizontal arm. The dual plunger-type gage mount is made to allow two probes to gain access to two OD's using one horizontal arm.

MicroTIR Gages

The MicroTIR user interface displays measurement results in a traditional analog-style needle and digital format. The maximum and minimum readings and TIR are all captured which removes potential operator error and user subjectivity. You can input part numbers and descriptions and your results can be saved or printed for customer verification or as a traveler for the part.

Lever-Type Probe (Shown without Mounting Clamp)

We provide industry-standard lever-type electronic indicators.

Changeable Probe Tip Adaptor

This adapter allows you to use 4-48 threaded probe tips which allow for an easy change of custom lengths, ball sizes, ball material etc. These adapters also eliminate left and right probe tip movement. This reduces the chance of improper probe placement on part surfaces.

Gage Blocks for Probe Calibration

ABTech’s gage blocks are a system for producing precision lengths. These are used to calibrate our standard lever and plunger probes on our standard products that use electronic probes. The individual gage block is metal and is precision ground to a specific thickness. An important feature of gage blocks is that they can be joined together with very little dimensional uncertainty. A small number of gauge blocks can be used to create accurate lengths within a wide range.

Electronics Carts

These electronics carts are used to mount monitors, PCs, and controllers, and provides shelf space for a keyboard, mouse, and an optional printer.

Anti-Rotational Lock

These anti-rotational locks are made for all EAS tables. They are classified as "best practice" for torquing parts, over shutting off the air supply.