NASA Chooses ABTech for Precision Telescope Optics Machines

NASA scientists challenged ABTech to develop a multifunctional machine that would act as a grinding lathe, an indexing tool for raster grinding and an assembly station—all in one. The machine would safely and quickly produce optics for their long-delayed NuSTAR X-ray telescope. ABTech met the challenge and delivered the machines to Columbia University’s Nevis Astrophysics Lab to help put the project back on schedule.

Custom NuSTAR 5-Axis Air Bearing LatheThe two turn-key, air bearing based, optics assembly machines grind the graphite mounting surfaces for 4,680 optical glass segments and assemble the cylindrical optics modules for NASA’s NuSTAR telescope, scheduled for launch in 2011. Each multi-function machine incorporates ultra-precision ABTech manufactured air bearings with direct drive motors and high-resolution encoders. Each machine has an extended travel Y-axis stacked onto dual parallel linear air bearings set with a wide stance to serve as the X-axis. An ABTech high-speed air bearing spindle is mounted on a unique custom-designed indexing turret. Coaxial head stock and tailstock air bearing spindles make up the precision lathe, which required ABTech to customize the CNC controller to operate in dual functioning lathe and indexing modes.

The contract was awarded to ABTech based on the technical merits of our proposal and our proven ability to deliver custom systems within critical time frames.

Features:

  • LAB-R series linear stacked air bearing stages straight and flat to less than 20 micro-inches (0.5 micron) over the full 24 inch (600mm) travel
  • Air bearing work holding and tailstock spindles (model WHS-180) for lathe operation or holding position of the optic during assembly and grinding
  • SP-125 high-speed air bearing spindle for grinding graphite mounting surfaces
  • Indexing turret assembly to quickly and easily transition between diamond turning, grinding and LVDT measurements
  • Granite surface plate and air bag style vibration isolation base frame
  • Ergonomic and multi-functional platform with both front and rear access
  • Customized Delta Tau CNC controller and electrical control cabinet

NuSTAR System Back ViewNuSTAR System Spindle CloseupNuSTAR System Lathe ViewNuSTAR First Finished Optic

See results of the telescope following the successful satellite launch in 2012 on the NuSTAR CalTech website: www.nustar.caltech.edu

Thanks a lot for your help. Your rapid, informative correspondence was invaluable. Hopefully I won't be bothering you with any further questions, but it's good to know you're willing. (following remote technical support provided for system installed at the South Pole) Morgan HedgesPost-doctoral Research Associate
Princeton University
Made in the U.S.A of U.S. and imported parts

Every product we sell exemplifies our company-wide commitment to "Pride in Precision" craftsmanship. To that end, all of our products are designed, manufactured, and tested exclusively by ABTech at our New Hampshire facility.

Back to top