ABTech Blog

ABTech designed a set of three high-speed air-bearing spindles which were synchronized for the 3-dimensional image scanning and inline inspection of the European high-speed rail system. These spindles are mounted on a dedicated rail car traveling at 75 mph creating a 3-D image every 10 cm   (less than 4″) of the rail to inspect the [Read More]

The engineers at the University of California’s Lawrence Livermore Labs needed a target assembly station with a position accuracy of 4 millionths of an inch—that’s 0.000,0004 of an inch (or 0.01 micron)—and ABTech delivered. The compact and mechanically elegant system we designed and manufactured incorporates six ABTech air-bearings, including three motorized air-bearing linear slides, two [Read More]

Thanks a lot for your help. Your rapid, informative correspondence was invaluable. Hopefully I won't be bothering you with any further questions, but it's good to know you're willing. (following remote technical support provided for system installed at the South Pole) Morgan HedgesPost-doctoral Research Associate
Princeton University
Made in the U.S.A of U.S. and imported parts

Every product we sell exemplifies our company-wide commitment to "Pride in Precision" craftsmanship. To that end, all of our products are designed, manufactured, and tested exclusively by ABTech at our New Hampshire facility.

Back to top