ABTech Blog

ABTech designed a set of three high speed air bearing spindles which were synchronized for the 3-dimensional image scanning and inline inspection of the European high speed rail system. These spindles are mounted on a dedicated rail car traveling at 75 mph creating a 3-D image every 10 cm   (less than 4″) of the rail [Read More]

The engineers at the University of California’s Lawrence Livermore Labs needed a target assembly station with a position accuracy of 4 millionths of an inch—that’s 0.000,0004 inch (or 0.01 micron!)—and ABTech delivered. The compact and mechanically elegant system we designed and manufactured incorporates six ABTech air bearings, including three motorized air bearing linear slides, two [Read More]

Thanks a lot for your help. Your rapid, informative correspondence was invaluable. Hopefully I won't be bothering you with any further questions, but it's good to know you're willing. (following remote technical support provided for system installed at the South Pole) Morgan HedgesPost-doctoral Research Associate
Princeton University
Made in the U.S.A.

Every product we sell exemplifies our company-wide commitment to "Pride in Precision" craftsmanship. To that end, all of our products are designed, manufactured, and tested exclusively by ABTech at our New Hampshire facility.

Back to top